Brief Introduction of Single-Head Copy-Routing Machine

Single-head Copy-routing Machine for Aluminum & uPVC Profile is used for copy-routing of water slots, pulley holes, lock holes and other hardware holes of aluminum and uPVC door & window. The milling bits can finish high-speed copy-routing on vertical direction, driven by a motor through a drive belt. The copy routing unit is equipped with a template, on which the copy-routing pin moves along the inner side of copy-routing holes or slots to make the milling bit finish copy-routing at the ratio 1:1. With the features of easy operation and high reliability, this copy router is common equipment for making aluminum and uPVC windows and doors.

Features of Single-Head Copy-Routing Machine

• Acceleration with a belt to achieve high-speed milling in copy-routing unit
• Able to copy route both uPVC profiles and aluminum profiles
• Templates can be made to meet the requirement of different installation holes and slots of window hardware 
• Horizontal pneumatic clamping, easy to place and clamp profiles

Main Technical Parameters of Single-Head Copy-Routing Machine

Power Supply                  380V 50Hz
Input Power                     0.75KW
Working Air Pressure     0.4-0.6Mpa
Air Consumption            30L/min
Copy-Routing Range     90*290mm
Motor Speed:                  2800r/min
Outside Dimension        1000*850*1500mm
Weight                              170Kg

uPVC and aluminum window milling machines are used to process hardware installation holes and slots, water slots, air-pressure balance grooves and other holes or slots in uPVC windows and doors, and it is an important component part of uPVC window production line. Milling hardware holes or slots and water-slots of windows is an important step in window-door manufacturing procedure. The quality of these holes or slots will have a direct influence on the quality of windows and doors.